Open Speedy Bottle Dryer

Because porous ceramic balls are built into the main unit, it dries faster than natural drying!
You can place two bottles when you open the stick.
You can use it by covering the bottle with the main unit, or by inserting it from above the bottle.
Recommended not only for bottles but also for drying stock bags.
The base can be removed for cleaning.
If you use the included joint parts, you can connect two units.
■ Specifications ■
Set contents: Main unit, base, joint parts
Heat/cold resistance: 120°C/-20°C
Not usable: Dishwasher, dryer
Before Use
Before use, check for damage or wobbling, and discontinue use if any defects are found.
When using for the first time, wipe with a damp cloth before use.
Do not wash with water.
Precautions for Use
The effect of moisture absorption and deodorization varies depending on usage conditions and indoor environment.
When placing bottles, use only if the mouth of the bottle can be placed stably on the base.
Depending on the diameter or length of the bottle, it may float or become unbalanced and fall over.
When placing bottles with the stick open, place them evenly without concentrating the load in one spot.
Ensure that the main unit and bottle are stable before use.
Place on a stable, flat surface as there is a risk of falling or damage.
Be careful not to apply excessive force when assembling the base and stick, or when opening the stick.
Wipe off excess water from the bottle before placing it.
Do not place valuables, fragile items, dangerous items, or excessively heavy items.
When moving, remove items placed on it before moving, as there is a risk of falling or damage.
Do not drop from a high place or apply sudden impact.
Do not use near fire or heat sources.
Use and store out of reach of infants and pets.
Do not use for purposes other than the intended use.
Care Instructions
Do not immerse the main unit in water as it may deteriorate.
After use, wipe off moisture with a damp cloth and dry.
The base can be removed for cleaning. When washing, use a neutral dish soap, rinse, wipe off water, and dry thoroughly before reattaching.
Do not use abrasive sponges, steel wool, or cleaners when washing. This may scratch the surface and damage the product.
Due to the nature of the material, a small amount of powder may occasionally come out from the inside of the main unit, but this is not a problem for hygiene. Wipe with a damp cloth to remove the powder.
Sun-dry in a well-ventilated place for about 5 hours every 2-3 weeks until thoroughly dry.
If the balls inside get wet, sun-dry them in the same way.
Store in a well-ventilated place.